The contract for the Korean RO (Reverse Osmosis) water purifier has finally been successfully completed, providing users with clean and healthy drinking water. The RO filter cartridge is a crucial component within the RO water purifier, playing a key role in filtering and ensuring the purity and safety of the drinking water. Let’s take a look at the process of replacing the RO filter cartridge together to ensure that you can continue to enjoy high-quality drinking water.
Preparation: Before replacing the RO filter cartridge, make sure you have purchased a new filter cartridge that is compatible with your RO water purifier. Read the instruction manual of the water purifier to understand the correct filter cartridge model and replacement cycle.
Shut off the water supply: Before starting the filter cartridge replacement, close the water supply valve of the RO water purifier to prevent unnecessary waste and confusion caused by water flow.
Safe drainage: RO water purifiers are usually equipped with a drainage switch or pipe. Open the drainage switch or connect the drainage pipe to ensure the residual water in the old filter cartridge is drained, avoiding splashing of wastewater.
Remove the old filter cartridge: According to the design of the RO water purifier, locate and remove the old filter cartridge. Ensure to pay attention to safety and avoid damaging other components of the water purifier.
Clean the water purifier casing and storage tank: Clean the water purifier body and then rinse the storage tank with clean water, removing impurities and dirt inside the tank.
Install the new filter cartridge: Install the new filter cartridge and ensure they are properly installed according to the model and instructions of the RO water purifier.
Activate the new filter cartridge: Turn on the water supply valve of the RO water purifier and follow the steps in the instruction manual. This may require allowing a certain amount of water to pass through the filter cartridge to remove any remaining particles.
Check for leaks: After activating the new filter cartridge in the RO water purifier, carefully inspect the area around the filter cartridge housing for any signs of leaks. If any leakage is found, check the installation of the filter cartridge for correctness and make necessary adjustments.
By following the above steps to replace the RO filter cartridge, you can ensure the normal operation of the water purifier and continue to obtain clean and healthy RO water. Remember, regular replacement of the filter cartridge is crucial for maintaining the performance of the water purifier, so please follow the manufacturer’s recommendations and replace the filter cartridge in a timely manner.
韩国 RO（反渗透）饮水机的合约终于圆满完成，为用户提供了清洁健康的饮用水。RO滤芯是RO饮水机中的核心部件，它起着关键的过滤作用，确保饮用水的纯净和安全。让我们一起了解RO滤芯的更换过程，以确保您能够持续享受高质量的饮用水。
准备工作：
在更换RO滤芯之前，确保您已经购买到与您的RO饮水机兼容的新滤芯。阅读饮水机的说明书，了解正确的滤芯型号和更换周期。
关闭水源：
在开始更换滤芯之前，关闭RO饮水机的水源开关，以防止水流造成不必要的浪费和混乱。
安全排水：
RO饮水机通常配备一个排水开关或管道。打开排水开关或连接排水管道，确保排出旧滤芯中的残余水分，避免污水溅出。
拆卸旧滤芯：
根据RO饮水机的设计，找到并拆卸旧滤芯。确保注意安全，避免损坏饮水机的其他部件。
清洗饮水机壳体和蓄水桶：
清洁饮水机机身，然后用清水冲洗蓄水桶，擦除桶内的杂质和污垢。
安装新滤芯：
将新滤芯安装，并确保它们正确安装。根据RO饮水机的型号和说明书。
激活新滤芯：
打开RO饮水机的水源开关，并按照说明书中的步骤。这可能需要让一定量的水通过滤芯以去除任何残留物。
检查漏水：
在RO饮水机激活新滤芯后，仔细检查滤芯壳体周围是否有漏水。如果发现任何漏水迹象，请检查滤芯的安装是否正确，并进行必要的调整。
通过按照以上步骤更换RO滤芯，您可以确保饮水机的正常运行，并持续获得清洁健康的RO水。请记住，定期更换滤芯是保持饮水机性能的关键，所以请遵循制造商的建议，并及时更换滤芯。
