Magic WPU6202 Water Dispenser Repair: Fixing Leaking Pipes & Replacing Filters
Today, we received an urgent service call from a customer regarding their Magic WPU6202 water dispenser. The issue? A broken water pipe, causing severe water leakage all over the floor. Our task was to repair the dispenser and replace the worn-out water pipes and filters.
Magic WPU6202 饮水机维修：水管破裂与滤芯更换
今天我们接到一通紧急维修电话，客户反馈家中的韩国 Magic WPU6202 饮水机出现水管破裂，导致饮水机漏水，水流满地，需要立即维修。
Inspection & Disassembly
- Water Dispenser Model: The unit is a Korean Magic WPU6202, equipped with hot & cold water functions and a 4-stage filtration system.
- Removing Old Filters: We first cleaned the ceramic pre-filter, then removed the PP Sediment Filter, UDF GAC Carbon Filter, Carbon Block Filter, and Post Carbon Filter.
- Identifying the Leak: Upon inspection, we found that the water pipes had deteriorated, leading to water dispenser leakage. A full pipe replacement was necessary.
检查与拆卸
- 饮水机型号：Magic WPU6202，具备冷热功能，并配备4支滤芯。
- 拆卸旧滤芯：我们先将前置陶瓷滤芯取出并清洗，然后拆下PP棉滤芯、活性炭滤芯、Carbon Block滤芯、后置活性炭滤芯。
- 水管老化破裂：发现饮水机所有水管已经老化，导致饮水机渗水问题，必须全部更换。
Repairs & Component Replacement
- Installing New Water Pipes: We replaced the old pipes with high-quality, food-grade tubing to prevent future leakage problems in the water dispenser.
- Cleaning the Water Tank: We disassembled and thoroughly cleaned the cold water tank to remove any residue or impurities.
- Replacing the Filters: We installed brand-new PP Sediment, UDF GAC Carbon, Carbon Block, and Post Carbon Filters, ensuring optimal filtration performance.
- Leak Test: After installation, we turned on the water supply and checked for any water leaks in the dispenser.
维修与更换
- 更换新水管：使用全新食品级水管，确保水管耐用，不会再次出现饮水机漏水问题。
- 清洗内桶：拆卸饮水机冷水内桶配件、热水加热槽的所有配件，进行彻底清洗，避免杂质残留。
- 安装新滤芯：更换全新的 PP Sediment、UDF GAC Carbon、Carbon Block、Post Carbon Filter 4支滤芯，并进行活性炭排水，防止炭粉影响水质。
- 检查漏水情况：所有滤芯安装完毕后，打开水源测试，确保饮水机无漏水问题。
Final Cleaning & Testing
- Exterior Cleaning: We used specialized cleaning solutions to wipe down the water dispenser’s exterior, followed by a final rinse with a damp cloth.
- System Testing: We powered up the Magic WPU6202 dispenser, ensuring that the hot and cold water functions were working properly.
最后清洁与测试
- 清洁饮水机机身：使用专用清洁剂擦拭饮水机外壳，再用湿布擦拭，保持外观洁净。
- 通电测试：启动饮水机，检查冷热水功能是否正常，确保维修完成。
Final Verdict: This repair service successfully resolved the water leakage issue by installing new pipes and filters. Now, the dispenser delivers clean, filtered water with no leaks or performance issues! 🚰💧
💡 维修总结： 这次维修不仅更换了老化水管，还安装了全新滤芯，彻底解决了饮水机漏水和水质问题，确保客户安心使用干净、健康的饮用水！
