In the fast-paced modern life, hot, warm and cold water dispensers have become an indispensable appliance for many households and workplaces. To ensure the safety of water quality and the superior taste, regular replacement and maintenance of the filter cartridge have become particularly important. Today, we will introduce you to the steps for replacing the filter cartridge of the CW-919 gray model hot, warm and cold water dispenser, as well as the proper maintenance methods.
Step 1: Replacing the Filter Cartridge
The CW-919 hot, warm and cold water dispenser features an advanced 5-layer filtration system to ensure pure and safe drinking water. First, let’s understand the steps for replacing the filter cartridge:
- Open the casing of the water dispenser to expose the filter cartridge area.
- Remove the old filter cartridge layer by layer, following the instructions in the user manual. Replace the 4 layers of filter cartridges in sequence.
- Ensure that the new filter cartridge is correctly installed and secure each layer of the filter cartridge.
Step 2: Cleaning the Ceramic Filter Cartridge
The ceramic filter cartridge is an important component in the CW-919 water dispenser, responsible for removing tiny particles and impurities from the water to improve water quality. Regularly cleaning the ceramic filter cartridge can extend its lifespan and effectiveness. Here’s how to clean the ceramic filter cartridge:
- Remove the ceramic filter cartridge and rinse it gently with running water to remove any accumulated dirt.
- If the dirt is stubborn, you can use a soft-bristle brush to gently scrub, but avoid using a brush that is too abrasive to prevent damaging the surface of the filter cartridge.
- After rinsing thoroughly, allow the ceramic filter cartridge to air dry, and then reinstall it into the water dispenser.
Step 3: Cleaning the Water Storage Tank
The water storage tank is where the water is stored in the water dispenser, so regular cleaning can prevent the growth of bacteria and maintain the freshness of the water. Here’s how to clean the water storage tank:
- Empty the remaining water and thoroughly clean the interior and exterior surfaces of the water storage tank with mild soapy water.
- Rinse with clean water to ensure that all soap residue is completely removed.
By regularly replacing the filter cartridge, cleaning the ceramic filter cartridge, and cleaning the water storage tank, you can ensure that the CW-919 hot, warm and cold water dispenser continues to provide fresh and pure drinking water. These simple steps not only protect the health of you and your family but also extend the lifespan of the appliance. Remember to follow the recommendations in the user manual to ensure proper operation and safe maintenance.
在快节奏的现代生活中，热冷暖饮水机已经成为了许多家庭和办公场所不可或缺的设备之一。为了确保水质的安全和口感的优越，定期更换和维护滤芯变得尤为重要。今天，我们将为您介绍型号为CW-919的灰色款式热冷暖饮水机的滤芯更换步骤，以及正确的维护方法。
第一步：更换滤芯
CW-919热冷暖饮水机的滤芯采用了先进的5层过滤系统，确保饮用水的纯净和安全。首先，让我们来了解一下滤芯更换的步骤：
打开饮水机的外壳，暴露滤芯区域。
逐层拆下旧的滤芯，按照使用手册中的指示进行操作。依次更换4层滤芯。
确保新滤芯正确安装，紧固每一层滤芯。
第二步：清洗陶瓷滤芯
陶瓷滤芯是CW-919饮水机中的一项重要组件，负责去除水中的微小颗粒和杂质，提高水质。定期清洗陶瓷滤芯可以延长其使用寿命和效能。以下是清洗陶瓷滤芯的方法：
将陶瓷滤芯取出，轻轻用流动的清水冲洗，去除附着的污垢。
如果污垢较为顽固，您可以使用软毛刷轻轻刷洗，但要避免使用过于强力的刷子，以免损坏滤芯表面。
冲洗干净后，将陶瓷滤芯晾干，并重新安装到饮水机中。
第三步：清洗蓄水桶
蓄水桶是饮水机中储存水的地方，因此定期清洗可以防止细菌滋生，并保持水的清新。以下是清洗蓄水桶的步骤：
倒掉残余的水，并用温和水彻底清洗蓄水桶内外表面。
用清水冲洗干净，确保完全清除干净。
通过定期更换滤芯、清洗陶瓷滤芯和蓄水桶，您可以保证CW-919热冷暖饮水机持续提供清新、纯净的饮用水。这些简单的步骤不仅可以保护您和您的家人的健康，还可以延长设备的使用寿命。记得遵循使用手册中的建议，确保正确操作和安全维护。
