Filter Case 123 : How to quickly and easily replace the uf membrane filter of the outdoor filter

How to quickly and easily replace the uf membrane filter of the outdoor filter

Outdoor filters are devices that can effectively remove impurities and bacteria from water. They use uf membrane filters as their core components. Uf membrane filters are filters that use ultrafiltration membranes to separate solutes and solvents from water. They have the characteristics of high efficiency, energy saving, and environmental protection. But uf membrane filters also need to be replaced regularly to ensure the safety and hygiene of water quality. The process of replacing uf membrane filters is very simple, and only requires the following steps:

  • Turn off the water source: To avoid the danger and waste caused by water flow, you need to turn off the water source first to ensure the safety and smoothness of the replacement process.
  • Open the filter canister: Use the appropriate tool, such as a wrench or a screwdriver, to open the filter canister and carefully remove the old uf membrane filter.
  • Check and clean the inside of the canister: Check whether there is dirt or damage inside the canister, and gently clean it with a soft cloth or sponge, avoiding scratching the canister or the ultrafiltration membrane.
  • Insert the new uf membrane filter: Put the new uf membrane filter into the canister, paying attention to align the interface and direction, and ensure that the installation is firm.
  • Seal the filter canister: Cover the filter canister and tighten it with a tool to ensure that there is no possibility of water leakage.
  • Turn on the water source and flush the new uf membrane filter: Turn on the water source and let the water flow through the new uf membrane filter, flushing away any possible impurities or bubbles. Check for any water leakage and ensure that the filter is operating normally.

By following the above steps, you can easily replace the uf membrane filter of the outdoor filter. It is recommended that you check the status of the filter every once in a while, and replace it in time if you find any dirt or damage, so as not to affect the water quality and quantity. At the same time, you can also choose the filter specifications that suit you. We offer a variety of different specifications to ensure that the filter you choose can perfectly fit your filter. 😊



  • 关闭水源:为了避免水流造成的危险和浪费,您需要先关闭水源,确保更换过程的安全和顺利。
  • 打开过滤器罐体:使用适当的工具,如扳手或螺丝刀,打开过滤器罐体,小心地取出旧的uf膜过滤器
  • 检查并清洁罐体内部:检查罐体内部是否有污垢或损坏,用柔软的布或海绵轻轻地清洁,避免划伤罐体或超滤膜。
  • 插入新的uf膜过滤器:将新的uf膜过滤器放入罐体内,注意对准接口和方向,确保安装牢固。
  • 密封过滤器罐体:将过滤器罐体盖好,用工具拧紧,确保没有漏水的可能。
  • 打开水源并冲洗新的uf膜过滤器:打开水源,让水流通过新的uf膜过滤器,冲洗掉可能残留的杂质或气泡。检查是否有漏水的情况,确保过滤器正常运行。