If you own a Perfect Steel outdoor filter, congratulations on having a reliable water purification device. To ensure its continued efficient operation, regular maintenance is crucial. This article will guide you on how to properly replace the filter media and activated carbon, and provide some advice on maintaining the body of the filter.
Step 1: Shut off the water source and drain, remove the cleaning valve head
Before starting the maintenance process, make sure to shut off the water source connected to the filter. Then, open the drain valve to empty any remaining water to prevent additional water pressure during maintenance. Disconnect the water pipes and remove the cleaning valve head.
Step 2: Replace the filter media and activated carbon
- Lay the filter down to facilitate the replacement of the filter media and activated carbon.
- Pour out the old filter media and activated carbon. Be sure to dispose of them properly to protect the environment.
- Gently tap the filter to ensure all remaining sandstone and activated carbon residue is cleared away.
- Install the new filter media and activated carbon one by one, ensuring correct placement.
Step 3: Check for leaks
After reassembling the filter, turn on the water source and observe if there are any signs of leakage. If any leaks are found, immediately shut off the water source and check if the seals are correctly installed.
Step 4: Clean the stainless steel body
Use a mild detergent and a soft cloth to carefully clean the surface of the stainless steel body, removing dirt and scale. Avoid using abrasive or corrosive cleaners to prevent damage to the surface.
Conclusion
By following the steps outlined above for maintenance, you can ensure that your Perfect Steel outdoor filter maintains its optimal performance, providing you with clean and healthy water continuously. If you need further assistance or want to learn more, please feel free to contact our customer service team.
如果您拥有一台 Perfect Steel 户外过滤器，恭喜您拥有了一台可靠的水质净化设备。为了确保其持续高效运行，定期的维护是至关重要的。本文将为您介绍如何正确地更换沙石滤芯和活性炭，并提供一些建议来保持机身的清洁。
步骤一：关闭水源和排空，卸下清洗阀头
在开始维护过程之前，请确保关闭与过滤器相连的水源。接着，打开排放阀，将残余水排空，以免在维护过程中产生额外的水压。
把水管分开，卸下清洗阀头。
步骤二：更换沙石滤芯和活性炭
将过滤器放倒以便更换滤芯和活性炭。
将旧的沙石滤芯和活性炭倒出。注意将其妥善处置，以保护环境。
轻轻拍打过滤器以确保所有沙石和活性炭残留物被清除干净。
将新的沙石滤芯和活性炭逐一装入过滤器内，确保安装正确。
步骤三：检查是否漏水
在重新装好过滤器后，打开水源，观察过滤器是否存在任何漏水现象。如发现漏水，请立即关闭水源，并检查密封件是否正确安装。
步骤四：清洗白钢机身
使用温和的清洁剂和柔软的布，仔细清洗白钢机身表面，以去除污垢和水垢。避免使用破坏性或腐蚀性的清洁剂，以免损坏表面。
结语
通过按照以上步骤进行维护，您可以确保 Perfect Steel 户外过滤器保持其最佳性能，持续为您提供干净健康的水源。如需进一步协助或了解更多信息，请随时联系我们的客户服务团队。
