MIDEA MYL838S hot and cold water dispenser is a popular home appliance that provides clean and refreshing water for daily use. However, in order to maintain the quality of the water and the performance of the dispenser, it is important to regularly replace and clean the filters. In this article, we will guide you through the process of replacing the filters and cleaning the dispenser.
Step 1: Turn off the power and unplug the dispenser
Before starting the filter replacement and cleaning process, make sure to turn off the power and unplug the dispenser from the electrical outlet to avoid any electrical hazards.
Step 2: Remove the water tank and filter cover
The water tank and filter cover are located at the top of the dispenser. To remove them, simply lift the water tank and pull out the filter cover.
Step 3: Remove the old filters
The MIDEA MYL838S hot and cold water dispenser comes with 4 different types of filters: sediment filter, pre-carbon filter, post-carbon filter, and carbon block filter. Each filter has a different lifespan and needs to be replaced accordingly. To remove the old filters, simply unscrew them from the filter housing.
Step 4: Install the new filters
After removing the old filters, install the new filters in the filter housing according to their respective positions. Make sure to follow the instructions provided in the user manual for the correct installation sequence.
To clean the dispenser, mix a small amount of mild detergent with water and use a clean cloth to wipe the dispenser body and water tank. Make sure to rinse the dispenser thoroughly with clean water afterwards.
Step 6: Reassemble the dispenser
After cleaning and replacing the filters, reassemble the dispenser by putting the filter cover back in place and reattaching the water tank. Plug the dispenser back into the electrical outlet and turn on the power.
In conclusion, replacing and cleaning the filters on MIDEA MYL838S hot and cold water dispenser is a simple and important maintenance task that can ensure the quality of the water and the performance of the dispenser. By following the above steps, you can easily replace and clean the filters on your MIDEA MYL838S hot and cold water dispenser.