Filter Case 98 : How to Replace a Water Filter Cartridge in a Beverage Shop: Step-by-Step Guide and Common 3-Layer Cartridge with PP Fiber, UF Membrane, and CTO Carbon

IMG 4548IMG 4549

Replacing the filter cartridge of a beverage shop is an important aspect of daily maintenance to ensure the hygiene and safety of beverages. Today, let’s learn how to replace the filter cartridge of a beverage shop and introduce a common 3-layer filter cartridge, which includes a 1-micron PP fiber layer, a 0.01-micron UF membrane layer, and a 5-micron activated carbon layer.

Preparation

Before replacing the filter cartridge, prepare the necessary tools and materials, such as a toolkit, a new filter cartridge, and cleaning cloth. Additionally, turn off the water source to ensure a safe and reliable replacement process.

Removing the old filter cartridge

Use the tools in the toolkit to remove the old filter cartridge. Be gentle during the removal process to avoid damaging the filter.

Cleaning the filter

Use a brush to clean the surface and inner casing of the filter to remove any dirt and impurities.

Installing the new filter cartridge

Take out the new filter cartridge and avoid dirtying the surface. Then, place the filter cartridge flat inside the filter.

Turning on the water source

Turn on the water source again and rinse the inside of the filter with clean water to ensure that the filter cartridge is fully in contact with the filter.

Now, let’s introduce a common 3-layer filter cartridge, which includes a 1-micron PP fiber layer, a 0.01-micron UF membrane layer, and a 5-micron activated carbon layer.

1-micron PP fiber layer: Filters out impurities and large particles such as sand, rust, and dirt.

0.01-micron UF membrane layer: Filters out microorganisms such as bacteria and viruses to ensure the safety and hygiene of the water.

5-micron activated carbon layer: Removes odor and discolored substances such as chlorine, odor, and harmful chemicals, making the water purer and fresher.

In summary, replacing the filter cartridge is crucial to ensure that the water quality in a beverage shop is clean and hygienic.

更换饮料店过滤器滤芯,保证饮料的卫生安全,是饮料店日常维护的重要内容。今天,我们来了解一下如何更换饮料店过滤器滤芯,并介绍一种常见的3层过滤器滤芯,它包含了1微米PP Fiber、0.01微米Uf membrane以及5微米活性炭。

准备工作

在更换过滤器滤芯之前,首先要准备好相应的工具和材料,例如工具包、新的滤芯、清洁布等。此外,需要关闭水源,以确保更换过程安全可靠。

拆卸旧的滤芯

使用工具包中的工具,将原来的滤芯拆卸下来。注意,拆卸过程要轻柔,以免损坏滤器。

清洁过滤器

将过滤器表面及里面内壳用刷子擦拭干净,以去除表面及里面内壳的污垢和杂质。

安装新的滤芯

取出新的滤芯,注意不要弄脏滤芯表面。然后将滤芯平放在过滤器中,

打开过滤器水源

重新打开水源,然后用清水将过滤器内部冲洗一遍,以确保滤芯与过滤器内部完全接触。

现在,让我们来介绍一种常见的3层过滤器滤芯。这种滤芯包含了1微米PP Fiber、0.01微米Uf membrane以及5微米活性炭。

1微米PP Fiber层:能够过滤掉水中的杂质和大颗粒的杂质,例如泥沙、铁锈和污垢等。

0.01微米Uf membrane层:能够过滤掉水中的细菌和病毒等微生物,以确保水的卫生安全。

5微米活性炭层:能够去除水中的异味和异色物质,例如氯、臭味和有害化学物质等,使水更加纯净清爽。

总之,更换过滤器滤芯是保证饮料店水质干净卫生

IMG 4550IMG 4551IMG 4552IMG 4554